Signal Booster Accessories

• 110V AC input;• 12V/3A DC output;• 6ft power cable;• Compatible with weBoost(R) Connect 4G-X(TM) & all WilsonPro 70 series cellular signal boosters;

• 2.5mm x 5.5mm x 11mm DC larger plug;• Ideal for use with weBoost(R) Connect RV 65;

• High-current power cord for weBoost(R) Drive Reach ;• Accessory plug preinstalled on 1 end ;• Fused for protection ;• Long cord allows easy installation;

• High-current direct wire power cord for weBoost(R) Drive Reach ;• Fused for protection ;• Extra-long cord allows for easy installation ;• Large gauge wire capable of high current needs of Drive Reach and Drive Reach Fleet;

• Connects cellular phone amps to antennas, taps & splitters;• F-male to F-male connectors;• For indoor & outdoor use ;• White;

• F-male to F-male;• 75ohm ;• White;

• Allows Wilson and weBoost(R) cellular antennas with coaxial cable terminated with an SMA male connector to be used with a Drive Reach and Drive Reach Fleet cellular booster;• Works with Wilson Marine and RV antennas;

• Allows Wilson and weBoost(R) trucker cellular antennas with coaxial cable;terminated with an SMA female connector to be used with a Drive Reach and Drive Reach Fleet cellular booster;

• 698 MHz to 2,700 MHz band ;• 75 ohms ;• -3 dB;• Cellular mobile communication ;• Low insertion loss and low VSWR;• High isolation and low ripple ;• Microstrip structure ;• Custom system design ;• 2-year warranty from purchase;

• 698 MHz to 2,700 MHz band ;• 75 ohms ;• -3 dB;• Cellular mobile communication ;• Low insertion loss and low VSWR;• High isolation and low ripple ;• Microstrip structure ;• Custom system design ;• 2-year warranty from purchase;

• 698 MHz to 2,700 MHz band ;• 75 ohms ;• -3 dB;• Cellular mobile communication ;• Low insertion loss and low VSWR;• High isolation and low ripple ;• Microstrip structure ;• Custom system design ;• 2-year warranty from purchase;

• Attenuation less than .2dB;• Freq range: up to 3GHz;• Replaceable gas discharge element (use part 859920);• Requires additional ground cable;

• Converts 12V-24V DC to 6V/2A DC from vehicle's cigarette lighter port/accessory port;• For powering weBoost(R) cellular signal boosters such as Drive 3G-M(TM), Drive 4G-M(TM), Drive 4G-X(TM), etc.;

• Mobile power supply converts 12V DC to 6V DC for applicable weBoost(R) vehicular cellular amps ;• Hardwire kit allows for direct power connection to vehicle battery or ignition;• Compatible with weBoost(R) Drive 4G-X(TM), Dirve 3G-X(TM), Drive 4G-M(TM)...

• For cell phone signal booster outdoor antennas ;• Attenuation less than .2dB ;• Freq range up to 3GHz ;• Replaceable gas discharge element (weBoost(R) 859921) ;• F-female connectors ;• Requires additional ground cable;

• Designed for mounting external antennas for cell phone signal boosters;• Includes wall-mount bracket, 10"L x 1.5" dia aluminum pole & U-bracket assembly;

• For easy installation of Wilson panel antennas on standard 2" pole;• Use only with Wilson outdoor panel antennas;• Resistant to harsh weather conditions;• Lightweight & sturdy;• Includes pole mount, 4 screws, 4 washers, U-bracket & L-bracket;

• 2-piece aluminum wall-bracket mounts to rear of panel antenna & wall then slides together to hold the antenna securely ;• Easy installation on interior walls;• For use with Wilson indoor panel antennas;• Lightweight & sturdy;• Includes 4 nylon drywall...

• Requires 3/4" hole in sheet-metal surface for connection ;• Permanent hole mount;

• Requires 3/8" hole in sheet-metal surface for connection ;• Permanent hole mount;

• 20ft length ;• 75ohm ;• F-male connectors on both ends ;• Low loss ;• White;

• 50ft length ;• 75ohm ;• F-male connectors on both ends ;• Low loss ;• White;

• 50ohm ;• Indoor use;• SMA-female to SMA-male connectors;

• SMA-male to FME-female connectors;

• SMA-male to SMA-female connectors;

• 50ohm ;• Works with any Wilson in-building amp equipped with N-connectors ;• Connects amp to splitter, tap, indoor or outdoor antennas ;• For indoor or outdoor use ;• LMR(R)-400 equivalent ;• N-male to N-male connectors ;• 100ft;

• N-male to N-male connectors;• 50ohm ;• 13/32" dia;• Connects outside antenna to cable or surge protector;• 3-year warranty from purchase;• 2ft;

• Works with any Wilson in-building amp equipped with N-connectors ;• Connects amp to splitter, tap, indoor or outdoor antennas ;• For indoor or outdoor use ;• N-male to N-male connectors ;• 10ft ;• Attenuates signal less than 1dB;

• N-male to N-male connectors;• 50ohm ;• 13/32" dia;• Connects outside antenna to cable or surge protector;• 3-year warranty from purchase;• 20ft;

• 50 ohms ;• Can be used for both consumer and commercial job applications in long length applications ;• Connects amplifiers, taps, splitters, and lightening surge protectors ;• For indoor or outdoor use ;• N-male to N-male connectors ;• 30 ft.;

• Works with any Wilson(R) in-building amp equipped with N connectors;• Connects amp to splitter, tap, indoor or outdoor antennas;• Attenuates signal less than 1dB;• For indoor or outdoor use;• N-male/N-male connectors;• 75ft;

• Ideal for extending the length of existing 50ohm weBoost(R) cellular antenna coaxial cables;• 15ft;

• Ideal for extending the length of existing 50ohm weBoost(R) cellular antenna coaxial cables;• 30ft;

• N-female to N-female barrel connector ;• Connects together 2 WiILSON400 coaxial cables with N-male adapters ;• For use in joining components of cell phone signal-booster kits ;• 3-year warranty from purchase;